In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...

a plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. the effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. shear mo...

In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...

Standing wave field distributions in three classic types of graded-index antireflection coatings are studied. These graded-index antireflection coatings are designed at wavelengths from 200 nm to 1200 nm, which is the working wavelength range of high energy laser system for inertial-fusion research. The standing wave field distributions in these coatings are obtained by the numerical calculatio...

The concept of functionally graded material (FGM) is currently actively explored in coating design for the purpose of eliminating the mismatch of thermomechanical properties at the interfaces and thus increasing the resistance of coatings to functional failure. In the present paper, three-dimensional elastic deformation of a functionally graded coating/substrate system of finite thickness subje...

Functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings were fabricated by plasma spraying using mechanically alloyed, plasma-spheroidized NiCoCrAlY/yttria-stabilized zirconia (YSZ) composite powders. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) analysis revealed that oxidation of aluminum, chromium and yttrium in the NiCoCrAlY alloy occurred in th...

In this paper a functional graded material (FGM) thermal barrier coating (TBC) is prepared using Atmospheric Plasma Spraying (APS) method. The FGM layers were deposited by varying the feeding ratio of CYSZ/NiCrAlY and conventional CYSZ on a NiCrALY-coated Inconel 738 substrates. Hot corrosion behavior, bonding strength and the related failure mechanisms of a conventional TBC and a FGM TBC are i...

The specific outputs of some diesel engine applications have produced thermal loadings in excess of the strength of typical aluminium piston alloys. Functionally graded coatings are used to increase performances of high temperature components in diesel engines. Thermal barrier coating are being evaluated to return the components durability to acceptable levels as well as providing a means of lo...

We report a novel graded refractive index antireflection coating for III/V quadruple solar cells based on bottom-up grown tapered GaP nanowires. We have calculated the photocurrent density of an InGaP-GaAs-InGaAsPInGaAs solar cell with a MgF2/ZnS double layer antireflection coating and with a graded refractive index coating. The photocurrent density can be increased by 5.9 % when the solar cell...

This paper discusses two common problems, “weld tenting” and low coating thickness over the external weld, and their causes in traditional three layer polyolefin pipeline coatings. To tackle these problems, a new approach to applying multilayer polyolefin coating to pipes is introduced. The new system consists of side-extruding high density polyethylene over a graded structure polyethylene (GSP...